Hello!
have a unique ask. Recently acquired a few accounts that are following thousands of people; some are great accounts that I'd like to keep following but a lot are accounts with a small following. Is there a way to only unfollow the accounts with bad ratios?
Unfollow Non-Bot Followed Accounts With Bad Ratios
-
martin@rootjazz
- Site Admin
- Posts: 37273
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Unfollow Non-Bot Followed Accounts With Bad Ratios
SEARCH tab
CUSTOM SEARCH
FOLLOWINGS
USER FILTER
Couple of options
1) set a max followers: 500 or whatever, but this does NOT factor in the ratio. You will IGNORE all accounts with more followers than 500, so the results will be profiles with LESS THAN 500. You then unfollow from list these profiles
2) Follow ratio: Info here: https://rootjazz.com/forum/viewtopic.php?f=30&t=5791
The Ratio = Followers / Followings.
so if you want to make sure accounts have a follow ratio of 2 (50% followings to followers, so if followers 1000 must have 500 followings etc, then you would want to set a min_ratio: 2. Meaning you will ignore profiles with good followings leaving just those with less than 50% followings, which you would then use to unfollow from list
Hopefully that makes sense. It can get complicated, because you want to IGNORE / FILTER OUT those you want to keep, making sure the results from your scrape are the profiles you DO NOT want to follow, so you can unfollow from that results file
I'd advise you set MAX RESULTS for your scrape to be 5 as a test, then check the results to make sure you have got your settings correct and those being saved to the results file are those you want to UNFOLLOW
Regards,
Martin
CUSTOM SEARCH
FOLLOWINGS
USER FILTER
Couple of options
1) set a max followers: 500 or whatever, but this does NOT factor in the ratio. You will IGNORE all accounts with more followers than 500, so the results will be profiles with LESS THAN 500. You then unfollow from list these profiles
2) Follow ratio: Info here: https://rootjazz.com/forum/viewtopic.php?f=30&t=5791
The Ratio = Followers / Followings.
so if you want to make sure accounts have a follow ratio of 2 (50% followings to followers, so if followers 1000 must have 500 followings etc, then you would want to set a min_ratio: 2. Meaning you will ignore profiles with good followings leaving just those with less than 50% followings, which you would then use to unfollow from list
Hopefully that makes sense. It can get complicated, because you want to IGNORE / FILTER OUT those you want to keep, making sure the results from your scrape are the profiles you DO NOT want to follow, so you can unfollow from that results file
I'd advise you set MAX RESULTS for your scrape to be 5 as a test, then check the results to make sure you have got your settings correct and those being saved to the results file are those you want to UNFOLLOW
Regards,
Martin