How do I use the software?

Support / help / discussion forum for twitter bot
Lemmeu
Posts: 30
Joined: Sun Mar 03, 2024 2:06 am

Re: How do I use the software?

Post by Lemmeu »

martin@rootjazz wrote: Fri Mar 08, 2024 3:25 pm try these settings

POST IMAGES tab
check 3 accounts
check SHARED
random pause: 300-600 (one image posted randomly every 5 to 10 minutes)
Select a folder of 30 images (or select a folder adn remove the images from the UI control so only 30 remain
max uploads: 0 (means all) or specify something >30
Run the action.

acc_1 posts img_1
pause 300-600 seconds
acc_2 posts img_2
pause 300-600 seconds
acc_3 posts img_3
pause 300-600 seconds
acc_1 posts img_4
...
acc_3 posts img_30
action stops



Next create a new action
Post images
check 3 accounts
check shared
pause: 60-120 (1 to 2 minutes)
select a folder of 30 images
max uploads: 3
Repeat hours 1
check UNIQUE


This action will:
acc_1 posts img_1
pause 60-120 seconds
acc_2 posts img_2
pause 60-120 seconds
acc_3 posts img_3
pause 60-120 seconds
action stops and reschedules for 1 hour
...
one hour later

acc_1 posts img_4
pause 60-120 seconds
acc_2 posts img_5
pause 60-120 seconds
acc_3 posts img_6
pause 60-120 seconds
action stops and reschedules for 1 hour

acc_1 posts img_7
....




Try the above and it should give you an idea of how things work
Before I started the previous process, it said "Waiting". Then I clicked on the "Run" button and the process started. When I checked, it shared 2 images within 1 minute. I immediately clicked the "Pause" button. During this process, the process section kept saying "Waiting". He shared 100+ images in 3 hours and when I clicked on it, the transaction history did not open.


I have made these settings now:

Image

I added 6 images. 3 accounts selected.

I clicked the "Run" button and the process started.

I will name the 3 accounts as Y-Z-T.

It shared from account Y and waited 60-120 seconds.
It shared from account Z and waited 60-120 seconds.
Instead of sharing from T account, It shared from Y account and waited for 1 hour.

At the end of 1 hour, it started the process again.

Shared from Y account and waited 60-120 seconds.
Shared from Z account and waited 60-120 seconds.
Instead of sharing from T account, he shared from Z account.

At the end of 1 hour, It shared 3 pictures on Y and Z accounts and 0 pictures on T account.

How can I find out why It did not share from T account?

I added 6 images. I opened "Unique uploads only" to share each image only 1 time. However, It shared 1 image on 2 different accounts.

When I click on the transaction history, I can see all the information of the accounts. How can I check this data without sharing it?
Aturingtest
Posts: 105
Joined: Mon Aug 05, 2019 5:14 pm

Re: How do I use the software?

Post by Aturingtest »

6 pictures ?
If it is set to unique uploads only and shared across accounts it will only upload the pictures once no matter how many accounts you choose.
And you have max upload set a 3 so in shared action only 6 pictures will be uploaded across all accounts, the first account will upload 3 and 2nd account another three.
User avatar
martin@rootjazz
Site Admin
Posts: 34712
Joined: Fri Jan 25, 2013 10:06 pm
Location: The Funk
Contact:

Re: How do I use the software?

Post by martin@rootjazz »

Lemmeu wrote: Sat Mar 09, 2024 3:09 am
I will name the 3 accounts as Y-Z-T.

It shared from account Y and waited 60-120 seconds.
It shared from account Z and waited 60-120 seconds.
Instead of sharing from T account, It shared from Y account and waited for 1 hour.

At the end of 1 hour, it started the process again.

Shared from Y account and waited 60-120 seconds.
Shared from Z account and waited 60-120 seconds.
Instead of sharing from T account, he shared from Z account.
Sounds as if the account T cannot be used and is being ignored.
How can I find out why It did not share from T account?
double click the account and look at the logs (or click RAW LOGS to view the full more detail log, it will be there - somewhere
I added 6 images. I opened "Unique uploads only" to share each image only 1 time. However, It shared 1 image on 2 different accounts.
That should not be possible. How did you run the action?
2 accounts
6 images
How many images per run? Any repeat?
Was the duplication within a single run? On a repeat? From a previous action?
Was the image filepath the same? Or was it same image different filename?


When I click on the transaction history, I can see all the information of the accounts. How can I check this data without sharing it?
HELP > LOGS > SUBMIT

then send your logs ID - the numbers are sufficient (displayed after successful uploading of logs)

http://rootjazz.com/forum/viewtopic.php?f=32&t=12078
This will send me the full app logs

To send me the specific action raw lows

Right click the action > RAW LOGS > copy and send me the contents of the file that opens.

Send that to

Code: Select all

support[at]rootjazz[dot]com


Regards,
Martin
Lemmeu
Posts: 30
Joined: Sun Mar 03, 2024 2:06 am

Re: How do I use the software?

Post by Lemmeu »

martin@rootjazz wrote: Sat Mar 09, 2024 1:54 pm
Lemmeu wrote: Sat Mar 09, 2024 3:09 am
I will name the 3 accounts as Y-Z-T.

It shared from account Y and waited 60-120 seconds.
It shared from account Z and waited 60-120 seconds.
Instead of sharing from T account, It shared from Y account and waited for 1 hour.

At the end of 1 hour, it started the process again.

Shared from Y account and waited 60-120 seconds.
Shared from Z account and waited 60-120 seconds.
Instead of sharing from T account, he shared from Z account.
Sounds as if the account T cannot be used and is being ignored.
How can I find out why It did not share from T account?
double click the account and look at the logs (or click RAW LOGS to view the full more detail log, it will be there - somewhere
I added 6 images. I opened "Unique uploads only" to share each image only 1 time. However, It shared 1 image on 2 different accounts.
That should not be possible. How did you run the action?
2 accounts
6 images
How many images per run? Any repeat?
Was the duplication within a single run? On a repeat? From a previous action?
Was the image filepath the same? Or was it same image different filename?


When I click on the transaction history, I can see all the information of the accounts. How can I check this data without sharing it?
HELP > LOGS > SUBMIT

then send your logs ID - the numbers are sufficient (displayed after successful uploading of logs)

http://rootjazz.com/forum/viewtopic.php?f=32&t=12078
This will send me the full app logs

To send me the specific action raw lows

Right click the action > RAW LOGS > copy and send me the contents of the file that opens.

Send that to

Code: Select all

support[at]rootjazz[dot]com


Regards,
Martin
I have been experimenting with image sharing for three days.

I have learned to share images without any problems for now.

Do you have any suggestions to increase the engagement of a newly opened account?

Which parts of the software do you recommend using?
Lemmeu
Posts: 30
Joined: Sun Mar 03, 2024 2:06 am

Re: How do I use the software?

Post by Lemmeu »

martin@rootjazz wrote: Sat Mar 09, 2024 1:54 pm
Lemmeu wrote: Sat Mar 09, 2024 3:09 am
I will name the 3 accounts as Y-Z-T.

It shared from account Y and waited 60-120 seconds.
It shared from account Z and waited 60-120 seconds.
Instead of sharing from T account, It shared from Y account and waited for 1 hour.

At the end of 1 hour, it started the process again.

Shared from Y account and waited 60-120 seconds.
Shared from Z account and waited 60-120 seconds.
Instead of sharing from T account, he shared from Z account.
Sounds as if the account T cannot be used and is being ignored.
How can I find out why It did not share from T account?
double click the account and look at the logs (or click RAW LOGS to view the full more detail log, it will be there - somewhere
I added 6 images. I opened "Unique uploads only" to share each image only 1 time. However, It shared 1 image on 2 different accounts.
That should not be possible. How did you run the action?
2 accounts
6 images
How many images per run? Any repeat?
Was the duplication within a single run? On a repeat? From a previous action?
Was the image filepath the same? Or was it same image different filename?


When I click on the transaction history, I can see all the information of the accounts. How can I check this data without sharing it?
HELP > LOGS > SUBMIT

then send your logs ID - the numbers are sufficient (displayed after successful uploading of logs)

http://rootjazz.com/forum/viewtopic.php?f=32&t=12078
This will send me the full app logs

To send me the specific action raw lows

Right click the action > RAW LOGS > copy and send me the contents of the file that opens.

Send that to

Code: Select all

support[at]rootjazz[dot]com


Regards,
Martin
I'm trying to use the "Daily promo" section.

In the video you say that if you add the URL part you don't need to add keywords: https://www.youtube.com/watch?v=ArqyVqz ... an&index=4

This video has no sound: https://www.youtube.com/watch?v=bzxXVXp08Ek

I added similar accounts in the form of https://twitter.com/user but it asks me to add 5 keywords. I honestly don't know what to write in this section. How can I use the daily promo section?
User avatar
martin@rootjazz
Site Admin
Posts: 34712
Joined: Fri Jan 25, 2013 10:06 pm
Location: The Funk
Contact:

Re: How do I use the software?

Post by martin@rootjazz »

Lemmeu wrote: Tue Mar 12, 2024 5:31 pm

I have been experimenting with image sharing for three days.

I have learned to share images without any problems for now.

Do you have any suggestions to increase the engagement of a newly opened account?

Which parts of the software do you recommend using?
With a newly opened account you need to be careful, if you start boosting it right away, twitter will know what you are doing.


Firstly you need to warm the account up - do not get it blocked / locked / banned basically


Then start interacting with it. like / retweet / comments.

but a RT isn't the same as a RT. If you get RT by 100 brand new accounts with 0 followers. That is not as good as a RT from a 10 year old account, used daily with 10k followers etc etc
User avatar
martin@rootjazz
Site Admin
Posts: 34712
Joined: Fri Jan 25, 2013 10:06 pm
Location: The Funk
Contact:

Re: How do I use the software?

Post by martin@rootjazz »

Lemmeu wrote: Wed Mar 13, 2024 2:01 am

I added similar accounts in the form of https://twitter.com/user but it asks me to add 5 keywords. I honestly don't know what to write in this section. How can I use the daily promo section?
Add keywords / similar accounts in same niche as your account. The more you add the better it is, so the program can find tweets / profiles to interact with.


That's all it does, you add 10 keywords, program does some searches on those keywords to find tweets / profiles

tweet search
tweet search> get likers / retweeters / replies
tweet search> get likers / retweeters / repliers > latest tweet
tweet search > get followers
tweet search > get followers> latest tweet

etc etc Just selects something at random
Lemmeu
Posts: 30
Joined: Sun Mar 03, 2024 2:06 am

Re: How do I use the software?

Post by Lemmeu »

martin@rootjazz wrote: Wed Mar 13, 2024 6:46 pm
Lemmeu wrote: Wed Mar 13, 2024 2:01 am

I added similar accounts in the form of https://twitter.com/user but it asks me to add 5 keywords. I honestly don't know what to write in this section. How can I use the daily promo section?
Add keywords / similar accounts in same niche as your account. The more you add the better it is, so the program can find tweets / profiles to interact with.


That's all it does, you add 10 keywords, program does some searches on those keywords to find tweets / profiles

tweet search
tweet search> get likers / retweeters / replies
tweet search> get likers / retweeters / repliers > latest tweet
tweet search > get followers
tweet search > get followers> latest tweet

etc etc Just selects something at random
I added 5 keywords. I added 50+ urls of similar accounts. I started the process as "safe". 10-15 minutes later it started giving this error. "WARNING: Rate limit exceeded!" What should I do?
Lemmeu
Posts: 30
Joined: Sun Mar 03, 2024 2:06 am

Re: How do I use the software?

Post by Lemmeu »

This warning went away and he made 60 likes. I looked at the likes but most of them were random. It seemed like meaningless transactions. Similar accounts I added were not processed much. He did this in the "Promo Likes/Follow" section. When I checked, he did not do any follow-up.

In the "Search Unlike" process, it says to start after 24 hours without doing anything.
"WARNING no items to process: Unlike

*********
Processed: 0/60
Failed: 0
*********"

In the "Search unfollow" section, no action was taken.

"*** WARNING ****
No bot follows were loaded from your database!
This can happen if
* you have not followed accounts in the bot
* you deleted account and readded which resets databaes IDs
* you deleted you processed items

If none of these apply, please contact support on the forum: https://rootjazz.com/forum
***
Found after search: 0
WARNING no items to process: Unfollow

*********
Processed: 0/40
Failed: 0
*********"

My questions

Why are there no follow-ups in the "Promo Likes/Follow" section?
What exactly does "Search Unlike" and "Search unfollow" do?
User avatar
martin@rootjazz
Site Admin
Posts: 34712
Joined: Fri Jan 25, 2013 10:06 pm
Location: The Funk
Contact:

Re: How do I use the software?

Post by martin@rootjazz »

Lemmeu wrote: Thu Mar 14, 2024 3:54 amIn the "Search unfollow" section, no action was taken.

"*** WARNING ****
No bot follows were loaded from your database!
This can happen if
* you have not followed accounts in the bot
* you deleted account and readded which resets databaes IDs
* you deleted you processed items
As the message says.

Is this the case?
Post Reply