I just set-up a follow process (follow user followers).
I used 'refine' (followers/followings 50-100.000).
I click start process and it shuts down in 1-3 seconds.
This happened when I used an account with 10 mil followers.
Afterwards I tried an account with 1 mil and another with half a mill followers. This time the software is not shutting down. It just shows 'processing' but nothing happens.
Software Closing when starting process
- martin@rootjazz
- Site Admin
- Posts: 34634
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Software Closing when starting process
http://rootjazz.com/twitterdub/download.html
If problem persists, please include ALL DETAILS so I can replicate your action. If you don't want them public, email them in
and submit logs
HELP > LOGS > SUBMIT
then send your logs ID - the first 4 numbers is sufficient (displayed after successful uploading of logs)
If problem persists, please include ALL DETAILS so I can replicate your action. If you don't want them public, email them in
Code: Select all
support[at]rootjazz[dot]com
HELP > LOGS > SUBMIT
then send your logs ID - the first 4 numbers is sufficient (displayed after successful uploading of logs)
-
- Posts: 86
- Joined: Fri Jun 26, 2015 1:04 pm
Re: Software Closing when starting process
Thanks.
Submitted logs and sent email with details.
Submitted logs and sent email with details.
- martin@rootjazz
- Site Admin
- Posts: 34634
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Software Closing when starting process
the download page was wrong
you want version 1.010
http://rootjazz.com/twitterdub/download.html
http://rootjazz.com/twitterdub/updatetesting.html
Regards,
Martin
you want version 1.010
http://rootjazz.com/twitterdub/download.html
http://rootjazz.com/twitterdub/updatetesting.html
Regards,
Martin
-
- Posts: 86
- Joined: Fri Jun 26, 2015 1:04 pm
Re: Software Closing when starting process
Working now.
Tested the unfollow/follow successfully.
For using filters, how do I get around the 889 seconds that I need to wait before searching more usernames?
Here is the log details:
Tested the unfollow/follow successfully.
For using filters, how do I get around the 889 seconds that I need to wait before searching more usernames?
Here is the log details:
Code: Select all
Got user: autocorrects username: Funny Tweets #followers: 3814030
Got followerIds: 5000
Get TwitterUser: 2896277705 using: CarmenLavrikova
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Completed Total Found: 0
* FAILED check active: lastActive: 2 > -1
* IGNORE: active date
Checking Filter: Default Av
Checking Filter: LastActive
Waiting: rate limited: Ready in: 889.0163322 seconds
Waiting: rate limited: Ready in: 889.0163322 seconds
- martin@rootjazz
- Site Admin
- Posts: 34634
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Software Closing when starting process
fixed bug with last active filter. Will be in next update
- martin@rootjazz
- Site Admin
- Posts: 34634
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact: