Hi Martin,
I sent an email a few days ago, wondering if you are able to assist with the below?
I am experiencing 3 problems with the mass update feature on TJ
1 - It will not update NSFW / Explicit to on
2 - It will not update the queue to post 25 times per day, it just stays on 2
3 - It will not hyperlink my URL in the description.
My logs no. is 84837. Let me know if you need anything else
Mass Update Error
- martin@rootjazz
- Site Admin
- Posts: 34706
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Mass Update Error
My apologies I remember the email. It must not have got noted on the todo list and lost under a pile of other things.
I will look into it today
I will look into it today
-
- Posts: 66
- Joined: Thu Oct 06, 2016 9:47 am
Re: Mass Update Error
Thanks mate appreciate it
- martin@rootjazz
- Site Admin
- Posts: 34706
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Mass Update Error
This is working for mechimpchomp01 wrote: ↑Fri Jun 22, 2018 2:01 am Hi Martin,
I sent an email a few days ago, wondering if you are able to assist with the below?
I am experiencing 3 problems with the mass update feature on TJ
1 - It will not update NSFW / Explicit to on
https://www.tumblr.com/settings/blog/<username>
at the very bottom: IS EXPICIT
however, I did notice another similar setting
https://www.tumblr.com/settings/account
SAFE MODE
Maybe this is what you are referring to? Or confusing the two?
again, working fine here
2 - It will not update the queue to post 25 times per day, it just stays on 2
again working fine for me3 - It will not hyperlink my URL in the description.
let me checkMy logs no. is 84837. Let me know if you need anything else
- martin@rootjazz
- Site Admin
- Posts: 34706
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Mass Update Error
Can you create action specific attempts.
Please perform the following:
Open the program. Delete or pause all existing actions. If actions are already running due to autorun on startup, disable autorun at startup and restart the app. All actions must be waiting, then pause all (or delete)
Delete existing logs
HELP > LOGS > VIEW
delete all files in the folder that opens
Perform the action:
***
goto ACCOUNT UPDATE tab
check your account (one)
turn NSFW off
create action
turn NSFW ON
create accction
set NSFW to leave
modify queue hours / amount
create action
reset queue settings
modify your description / bio using html for the linke
create action
run them all, one at time.
Check real time logs, do they report success?
If not, submit logs
HELP > LOGS > SUBMIT
then send your logs ID - the first 4 numbers is sufficient (displayed after successful uploading of logs)
Maybe this is the difference, I tested one at a time and they all worked. I see from your logs you tried to do many things in an action (which should work - but lets step it back to see if it works for you as single steps)
Regards,
Martin
***
PLEASE NOTE: Do not perform other actions at the same time. Only use one thread. Do not run any actions after this action.
Then submit logs:
HELP > LOGS > SUBMIT
and let me know the LOGS ID (just the number part is sufficient)
Regards,
Martin
Please perform the following:
Open the program. Delete or pause all existing actions. If actions are already running due to autorun on startup, disable autorun at startup and restart the app. All actions must be waiting, then pause all (or delete)
Delete existing logs
HELP > LOGS > VIEW
delete all files in the folder that opens
Perform the action:
***
goto ACCOUNT UPDATE tab
check your account (one)
turn NSFW off
create action
turn NSFW ON
create accction
set NSFW to leave
modify queue hours / amount
create action
reset queue settings
modify your description / bio using html for the linke
create action
run them all, one at time.
Check real time logs, do they report success?
If not, submit logs
HELP > LOGS > SUBMIT
then send your logs ID - the first 4 numbers is sufficient (displayed after successful uploading of logs)
Maybe this is the difference, I tested one at a time and they all worked. I see from your logs you tried to do many things in an action (which should work - but lets step it back to see if it works for you as single steps)
Regards,
Martin
***
PLEASE NOTE: Do not perform other actions at the same time. Only use one thread. Do not run any actions after this action.
Then submit logs:
HELP > LOGS > SUBMIT
and let me know the LOGS ID (just the number part is sufficient)
Regards,
Martin
-
- Posts: 66
- Joined: Thu Oct 06, 2016 9:47 am
Re: Mass Update Error
thanks Martin, I will give this a try and let you know how it goes.
- martin@rootjazz
- Site Admin
- Posts: 34706
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Mass Update Error
ok, let me know
-
- Posts: 66
- Joined: Thu Oct 06, 2016 9:47 am
Re: Mass Update Error
Hi Martin,
I have tested islolating the mass updates as you said and they now seem to be working. I will let you know if I run into anymore problems.
Thanks for your help.
Best Wishes,
Jesse
I have tested islolating the mass updates as you said and they now seem to be working. I will let you know if I run into anymore problems.
Thanks for your help.
Best Wishes,
Jesse
- martin@rootjazz
- Site Admin
- Posts: 34706
- Joined: Fri Jan 25, 2013 10:06 pm
- Location: The Funk
- Contact:
Re: Mass Update Error
ok, so it would appear there is an issue when you try and do multiple edits at once.
Do you know exactly what options you were trying to set at once? If so, I can start there to investigate and figure it out. As you "should" be able to set multiple options to update
Do you know exactly what options you were trying to set at once? If so, I can start there to investigate and figure it out. As you "should" be able to set multiple options to update